Crystal Inspire 104 - Night Mode

TRUNK ( INCOMING / OUTGOING ) : DEFAULT STATUS
Model
Incoming Call (Day/Night Mode)
Extn. no. Mode
Outgoing Call (Day/Night Mode)
104
206
308
414
21,22,23,24
21,22,23,24,25
21,22,23,24,25
21,22,23,24,25
Round Robin
Round Robin
Round Robin
Round Robin
Calling Level
Local level at all extn.
Local level at all extn.
Local level at all extn.
Local level at all extn.
Mode
Rotational
Rotational
Rotational
Rotational
Caller ID
Trunk / Extn.
Enable
Enable
Enable
Enable
Note :- (1) Incoming call of trunk ring duration (max.) depend on service provider timeout limit.
(2) External FSK CLI ( Optional ), DTMF CLI inbuilt.
USER FUNCTION : DEFAULT STATUS
Always active User/System Defined
Intercom Call Junction No. Access (System program)
Last No. Redial Barge in (System program)
Answer/ Receive Call Call toggle (System program)
CLI Monitor (System program)
Call pickup Hot line (Extn./Jn.) (System / User program)
Selective call pickup Conference (System program)
Auto call Back(extn/jn) Day/Night Mode (System / User program)
Call transfer Dynamic Lock (System / User program)
Do not Disturb Relay (System program)
DND cancel Paging (System / User program)
Call Forward Global Dial (System program)
Call Forward cancel Trunk Reservation (System program)
Alarm Emergency dial (System program)
General Functional Information
Note :- 308/414 Model only support timer function like alarm, auto day night,.............etc.
RING PATTERN : DEFAULT STATUS
Ring Type Ring Pattern
Intercom Call
(a) Normal Long single cycle ring ______ Long pause
(b)Executive Small single ring ___ Small pause
(c) Cordless Long single cycle ring ___ Small pause
Trunk Call Double cycle ring___ Small pause
Note :- Default intercom ring pattern set as normal ring.
LED Status Abbreviations
RUN ON / OFF Blinking System normal condition
NIGHT MODE ON or OFF ON = Active night mode, OFF = Active Day mode
LINE 1/2/3/4 ON or OFF ON = Trunk line busy, OFF = Trunk line free
EXTN. LED ON or OFF (308 only) ON = Extension busy, OFF = Extension free
LED STATUS :
Inspire 104/206/308/414 User Guide
11