LD 500_SHORT BAL_V2.03 EN Page 20 of 20
The following pages list the individual leakages:
Modifying company master data (customer)
Path: Dashboard → Companies→ Master data
In this screen the contact details of the customer, which
will be printed in the report, can be entered.
Modifying project master data
Path: Dashboard → Companies→ Project → Master data
In this screen, the parameters of the project can be
adapted if the configuration of the LD500 was faulty or in-
complete. The entries made there are then used for all
leakages in the project.
Further explanations and details can be found under:
Instruction manual: https://www.cs-instruments.com/downloads/instruction-manuals
LD500: https://www.cs-instruments.com/products/d/leak-detection/leak-tester-ld500-to-detect-
and-calculate-leakages