CSG Security NVeDVR - DVR Rear Panel Connections

500-1421E rev1.2 NVeDVR User Guide 59
DVR Rear Panel Connections
NVEF04, 4 Channel DVR with Video/Audio Aux, NVEC04, 4 Channel DVR without Video/Audio Aux
Not Available on
NVEC04 model
13
VGA
RS232 UTP
USB
ESATA
GG
(+)
T
(+)(–) (–)
TRR
RS-485
Alarm Inputs
KEYBOARD
Video
Inputs
Audio
Inputs
12 3 4
1234
12G GGG
Alarm
Outputs
VOUT
AOUT
VAUX
AAUX
LINE IN
2
4
6
7
5
12
8
SW1
12
ON
10
9
11
Electrical power
cord input
Electrical
power
ON/OFF
switch
NVEC08/NVEF08, 8 Channel DVR, NVEC16/NVEF16, 16 Channel DVR
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
VOUT
AOUT
AUX
VOUT AOUT
LINE
IN
VGA
RS232 ETHERNET
USB
ESATA
Electrical power
cord input
12345 678910111213141516GG
GG
(+)
T
(+)(–) (–)
TRR
(+)(–)
GO1 GG23G4G
RS-485
KB
Alarm Outputs
1 1
3 2 4 6 7 5 8
SW1
12
ON
9
Electrical
power
ON/OFF
switch
10
Alarm Inputs
11 12
Not Available on 8 Channel Models
Video Inputs
Audio Inputs
Detail Connection/Model Description
Video Input Standard BNC
1
Audio Input Standard BNC
Main Video Output Connect CCTV monitor, output video and OSD menus.
2
Main Audio Output Local audio output.
Auxiliary Video Output Spot monitor for video preview and playback. (NOTE: Not available on NVEC04)
3
Auxiliary Audio Output Spot monitor for audio preview and playback. (NOTE: Not available on NVEC04)
4 Line In Audio line input for voice talk.
5 USB Interface USB Mass Storage Device, USB HDD, USB CD-R/W, USB DVD, USB Mouse.
6 VGA Input VGA display.
Optional
Keyboard
Connect a DS-1000KI keyboard with PTZ joystick to e.g. left RJ45 connector.
Interconnect with another DVR using the RJ45 connector on the right.
RS-232 Connect RS-232 devices.
NVEC04
and
NVEF04
UTP
Network
Interface
Connect network devices. 10/100baseT Ethernet.
RS-232 Connect RS-232 devices.
7
NVEC08/
NVEF08 and
NVEC16/
NVEF16
Ethernet Connect network devices. 10/100baseT Ethernet.
8 E-SATA Connect an external hard drive.
9
SW1
Switch 1. RS-485 terminal resistor switch. Termination resistor for PTZ control
line. Default is OFF. The resistor is 120 Ohm.