The receiver will return the following response.
$>JT,type
Where type is one of the following:
Type Description
SLXg The DGPS MAX will respond with ‘SLXg’, where SLX is the name
of the board controlling the receiver and ‘g’ stands for GPS system.
SX1g The Mini MAX will respond with SX1g, where SX1 is the name of
the board controlling the receiver and ‘g’ stands for GPS system.
SX1a The Vector, Vector PRO, Vector Sensor, Vector Sensor PRO and
Vector OEM will respond with SX1a where SX1 is the board
controlling the receiver and ‘a’ stands for attitude system.
3.17 $JI
This command displays receiver information. It has the following format:
$JI<CR><LF>
The receiver will reply with the following message.
$>JI,11577,1,5,11102002,01/01/1900,01/01/3003,1.1,38
This command is summarized in the following table.
Message Component Description
To Next Page
Loading...
Need help?
General
