CSI Wireless Vector Sensor User Manual

Vector Sensor Reference Manual 118
source
• Verify the pin-out between the RTCM source
and the RTCM input port (transmit from the
source must go to receive of the RTCM input
port and grounds must be connected - Refer to
Appendix B)
Non-differential GPS output • Verify Vector Sensor SBAS and beacon lock
status (or external source is locked)
• Confirm baud rates match an external source
correctly
• Issue a $JDIFF<CR><LF> command and see if the
expected differential mode is in fact the current
mode

CSI Wireless Vector Sensor Specifications

General

Brand	CSI Wireless
Model	Vector Sensor
Category	Receiver
Language	English