the entered satellite, if it's found in the loaded TLE file.
The Satellite Status link will open the Amsat Satellite Status Page in a new window .
The SatNOGS link will open the excellect SatNOGS map for the currently tracked satellite.
Available Buttons:
NEXT PASSES - Predict and display current and future passes.
VIEW ALL - View the entire set of satellites stored in the S.A.T.
CONTINUOUS - Continue tracking the selected satellite even after LOS. A green button indicates
Continuous mode is active. A red button means Continous mode is not active.
SCHEDULE - Enable/Disable satellite schedule mode. See SCHEDULE section below for details.
READY - Move the antenna to the Ready position
PARK - Move the antenna to the Park position
ANT ENABLE - Enable or disable the rotator. Green to enable the rotator and red to disable. When
disabled, no movement commands will be sent to the rotator.
STOP - Stop all movement and tracking
Map & Chart Panels
Worldmap
This is a full color map display. With this style of display you can see the satellite location above the
Earth and it current track. In the lower left is a graphical display of the current antenna position.
In the bottom right of the map is a little icon that will toggle the ground track display on and off
when clicked.
To Next Page
Loading...
Need help?
General