EasyManua.ls Logo

CSSN ScanShell 2000 - Concatenateimage

CSSN ScanShell 2000
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10350 Santa Monica Blvd. Suite 285,
Los Angeles, CA 90025
Phone: 310-691-8920, 310-788-9840, Fax: 419-735-2419
Card Scanning Solutions 39
Image reformat can be done either on the image color scheme or the image dpi or both. Notice that
changing the image format may lose the image color information (e.g., when converting from 24 bit
true color to 256 gray scale). Modifying and image format from 256 gray scales to 24 bit true color will
(obviously) not add color to the image but it will save the image with the proper RGB format (no color
map) instead of or using 256 gray scale palette.
After the image is reformatted it can be exported to external image file. The destination file name may
be one of the seven file formats indicated above. If the destination file name has unrecognizable
extension the function exports to the file in a BITMAP format (the default format). If no destination
image file name is given (empty string) no save is done.
Important: The 256 colors scheme is NOT supported for JPG and TIF files.
1.1.45. ConcatenateImage
Type
Function.
Format
Parameters
[in] SourceImage0 Full path name of the first image.
[in] Angle0 The angle to rotate SourceImage0 before the combination.
[in] SourceImage1 Full path name of the second image.
[in] Angle1 The angle to rotate SourceImage0 before the combination.
[in] CombType The location of the images in the result image file:
IMAGE_COMB_HORIZONTAL SourceImage0 is located to the left of SourceImage1
IMAGE_COMB_VERTICAL - SourceImage0 is located above SourceImage1.
[in] DestType The destination of the rotated image. This parameter may be one of two values:
SAVE_TO_FILE : Save the image to a file. The file name should be given in DestImage parameter.
SAVE_TO_CLIPBOARD : Copy the rotated image the image to the clipboard.
[in] DestImage Full path name of the destination file. This parameter is ignored if the parameter
DestType is set to SAVE_TO_CLIPBOARD.
Return
If function succeeds, the return the value IMG_ERR_SUCCESS.
ConatenateImage( _
SourceImage0 As String, _
Angle0 As Long, _
SourceImage1 As String, _
Angle1 As Long, _
CombType As Long, _
DestType As Long, _
DestImage As String _
)

Table of Contents

Other manuals for CSSN ScanShell 2000

Related product manuals