10350 Santa Monica Blvd. Suite 285,
Phone: 310-691-8920, 310-788-9840, Fax: 419-735-2419
Card Scanning Solutions 42
Parameters
[in] SourceImage – Full path name of the original image.
[in] TextType – Instruct the OCR what type of data is written in the image. This value increases the
detection accuracy and speeds the OCR operation. This value can be one of the following values:
USE_ALPHANUM : The image contains alphanumeric characters.
USE_ALPHA_CAPS_ONLY: The image contains capital letters only.
USED_NUM_ONLY : The image contains numbers only
Return
If function succeeds, the return the value TOCR_SUCCESS.
If the function fails it returns one of the following values:
LIC ENSE_INVALID – Library was not initialized with proper license.
TOCRJOBERROR – The OCR engine was not able to accomplish the detection process correctly.
TOCR_BAD_TYPE– Bad TextType value.
Remarks
Use this function to extract text bulks from an image. The text size is limited to 4K (4096) characters.
1.1.48. ExtractTextEx
Type
Function.
Format
Parameters
[in] SourceImage – Full path name of the original image.
Return
If function succeeds, the return the value TOCR_OK (=0).
If the function fails it returns one of the following values:
LICENSE_INVALID – Library was not initialized with proper license.
TOCRJOBERROR – The OCR engine was not able to accomplish the detection process correctly.
TOCR_BAD_TYPE– Bad TextType value.
Remarks
Use this function to extract text bulks from an image. The text size is limited to 4K (4096) characters.
This function process the image file in a different method than ExtractText function does; this result in
a longer processing time but with higher accuracy. This function is recommended for use with complex
document structure where processing time is not critical.
ExtractTextEx ( SourceImage As String )
To Next Page
Loading...
