Need help?Do you have a question about the CTC Union FRM220-NMC and is the answer not in the manual?
Provides an overview of the manual's structure, purpose, and intended audience.
Details the core features, capabilities, and chassis compatibility of the Network Management Controller.
Step-by-step guide for the physical installation of the NMC card into the FRM220-CH20 chassis.
Explains the SNMP capabilities and provides an introduction to the NMC's management functions.
Introduces the chapter focusing on serial console configuration and initial setup.
Guides users on connecting via serial console using terminal emulation software like PuTTY.
Details critical steps for setting IP addresses, subnet masks, and default gateways for network access.
Provides procedures and considerations for performing online software upgrades on the NMC card.
Introduces the chapter detailing the web GUI for monitoring and configuring the iAccess Platform.
Describes the main web interface, selectable features, and the chassis list control.
Covers system information, TFTP updates, date/time settings, and parameter management.
Explains how to configure SNMP settings and view chassis information through the web interface.
Addresses common issues related to IP addresses, subnet masks, and default gateways for agent settings.
Guides on verifying manager settings and ensuring network access through firewalls for SNMP communication.
Covers functional details, block diagrams, configuration, and firmware upgrade for this card.
Details specifications, panel layout, provisioning by DIP, and firmware for E1/T1 modems.
Explains functional details, panel layout, and provisioning methods for serial/485 modems.
Details the 155Mbps converter/repeater's features, specifications, and management options.
Covers 4.25G transponder functional details, provisioning, and firmware upgrade procedures.
Provides instructions for upgrading the firmware on the 10Gbps fiber transponder card.
Details the 4.25G transponder's functional aspects, provisioning, and firmware update process.
Explains the OLP card's features, provisioning via DIP switch, and management capabilities.
Covers the features and management of the web smart media converters.
Provides specifications, management features, and reset procedures for the 802.3ah converter.
Provides an overview of the manual's structure, purpose, and intended audience.
Details the core features, capabilities, and chassis compatibility of the Network Management Controller.
Step-by-step guide for the physical installation of the NMC card into the FRM220-CH20 chassis.
Explains the SNMP capabilities and provides an introduction to the NMC's management functions.
Introduces the chapter focusing on serial console configuration and initial setup.
Guides users on connecting via serial console using terminal emulation software like PuTTY.
Details critical steps for setting IP addresses, subnet masks, and default gateways for network access.
Provides procedures and considerations for performing online software upgrades on the NMC card.
Introduces the chapter detailing the web GUI for monitoring and configuring the iAccess Platform.
Describes the main web interface, selectable features, and the chassis list control.
Covers system information, TFTP updates, date/time settings, and parameter management.
Explains how to configure SNMP settings and view chassis information through the web interface.
Addresses common issues related to IP addresses, subnet masks, and default gateways for agent settings.
Guides on verifying manager settings and ensuring network access through firewalls for SNMP communication.
Covers functional details, block diagrams, configuration, and firmware upgrade for this card.
Details specifications, panel layout, provisioning by DIP, and firmware for E1/T1 modems.
Explains functional details, panel layout, and provisioning methods for serial/485 modems.
Details the 155Mbps converter/repeater's features, specifications, and management options.
Covers 4.25G transponder functional details, provisioning, and firmware upgrade procedures.
Provides instructions for upgrading the firmware on the 10Gbps fiber transponder card.
Details the 4.25G transponder's functional aspects, provisioning, and firmware update process.
Explains the OLP card's features, provisioning via DIP switch, and management capabilities.
Covers the features and management of the web smart media converters.
Provides specifications, management features, and reset procedures for the 802.3ah converter.
General| Device Type | Network Management Controller |
|---|---|
| Model | FRM220-NMC |
| Manufacturer | CTC Union |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 3.5 kg |
| Management Protocol | SNMP |
| Management | Web-based, CLI |
| Operating Temperature | 0 to 50 °C |
| Chassis Slots | 2 |
| Interface | Console, Ethernet |
| Humidity | 5% to 90% non-condensing |
| Dimensions | 440mm x 220mm x 44mm |
| Form Factor | Standalone / Rack Mountable |
To Next Page