CTEK M200 User Manual

M200
Battery Charger
For lead-acid batteries
User Manual and Guide to professional
charging of starter and deep cycle batteries.
EN

CTEK M200 Specifications

General

Output Current	20A
Insulation class	IP44
Input Voltage	220–240VAC
Charging Voltage	14.4V/14.7V
Charging Current	20A
Battery Type	12V lead-acid batteries
Battery Capacity	Up to 300Ah
Charging Programs	8-step
Protection Features	Over temperature protection

Summary

Charging

Connecting to a Vehicle Battery

Instructions for connecting the charger to a battery fitted inside a vehicle.

Connecting to an Out-of-Vehicle Battery

Instructions for connecting the charger to a battery removed from a vehicle.

Start Charging Process

Steps and indicators for initiating the charging process and what they signify.

Battery Types and Settings

Normal Mode

Recond Mode

Charging Phases

Desulphation Phase

Recovers sulphated batteries using pulses.

Soft Start Phase

Initial phase of charging; tests battery condition.

Bulk Charging Phase

Absorption Charging Phase

Recondition Phase

Indicators

Charging Status Lamps (0-5)

Fault Mode Causes

Situations where the charger enters fault mode, e.g., reversed poles.

Temperature Compensation

Voltage Adjustment

Specification

Technical Details