CTEK MXS 3.6 User Manual

EN
EN • 3
MODE
12V/0.8‒3.6A
MXS 3.6
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger.
This charger is included in a series of professional chargers from CTEK SWEDEN AB and
represents the latest technology in battery charging.
CTEK COMFORT CONNECT – eyelet M6
MODE
12V/3.6A
MXS 3.6
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT – clamp
CHARGE CABLE
SUPPLY PLUG*
* Supply plugs may differ to suit your wall socket.
SMALL
BATTERY
PROGRAM
ERROR LAMP
NORMAL
BATTERY
PROGRAM
COLD
WEATHER
PROGRAM
STANDBY
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The Standby lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is fully charged when
is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket or by
setting the charger on Standby.
MODE-
BUTTON
MANUAL
DESULPHATION
BULK
ABSORPTION
FULLY CHARGED
PULSE , MAINTENANCE CHARGING
20015449F Manual MXS 3.6, EU. Print file 006.indd 3 2011-10-10 16:36:19

CTEK MXS 3.6 Specifications

General

Input Voltage	220–240VAC, 50–60Hz
Charging Current	3.6A max
Operating Temperature	-20°C to +50°C
Dimensions	165 x 61 x 38 mm
Weight	0.6 kg
Insulation Class	IP65
Output Voltage	14.4V
Battery Capacity	1.2Ah
Battery Types	Wet, MF, AGM, GEL
Protection Features	Reverse polarity protection, short circuit protection

Summary

Battery Charging

Charging Process Overview

Explains the basic steps to connect and initiate the battery charging cycle.

Charging Programs and Stages

Details the different charging programs and the distinct stages of the charging cycle.

Error Handling

Guides users on troubleshooting issues indicated by the error lamp during charging.

Connecting and Disconnecting the Charger

Procedure for Vehicle-Mounted Batteries

Step-by-step instructions for connecting the charger to a battery installed within a vehicle.

Procedure for Positively Earthed Batteries

Specific guidance for connecting the charger to batteries with a positive earth system.

Technical Specifications

Safety Precautions

General Safety Warnings

Lists essential safety guidelines for using the battery charger and handling batteries.

Battery Handling and Environment

Advises on safe practices related to battery acid, ventilation, and unattended charging.

Limited Warranty and Support

Warranty Information

Details the terms, duration, and conditions of the product's limited warranty.

Customer Support Channels

Provides contact information and resources for professional customer support.