CONGRATULATIONS
to the purchase of your new professional switch mode battery charger.
This charger is included in a series of professional chargers from CTEK SWEDEN AB and
represents the latest technology in battery charging.
CTEK COMFORT CONNECT – eyelet M6
MODE
12V/0.8‒3.6A
MXS 3.6
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT – clamp
CHARGE CABLE
SUPPLY PLUG*
* Supply plugs may differ to suit your wall socket.
SMALL
BATTERY
PROGRAM
ERROR LAMP
NORMAL
BATTERY
PROGRAM
COLD
WEATHER
PROGRAM
STANDBY
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The Standby lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is fully charged when
is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket or by
setting the charger on Standby.
MODE-
BUTTON
MANUAL
DESULPHATION
BULK
ABSORPTION
FULLY CHARGED
PULSE , MAINTENANCE CHARGING
20015449F Manual MXS 3.6, EU. Print file 004.indd 3 2011-06-29 14:50:04
To Next Page
Need help?
General
