CTEK MXS 7.0 User Manual

EN
EN • 3
ABSORPTION, READY TO USE
ANALYSE
RECOND
RECOND
MODE
12V/7A
MXS 7.0
SUPPLY
SUPPLY
NORMAL
AGM
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger.
This charger is included in a series of professional chargers from CTEK SWEDEN AB and
represents the latest technology in battery charging.
CTEK COMFORT CONNECT – eyelet M8
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT – clamp
CHARGE CABLE
SUPPLY PLUG*
*Supply plugs may differ to suit your wall socket.
NORMAL
BATTERY
PROGRAM
ERROR LAMP
AGM
BATTERY
PROGRAM
RECOND
PROGRAM
SUPPLY
PROGRAM
POWER
LAMP
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when
is lit.
The battery is fully charged when is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
MODE-
BUTTON
MANUAL
DESULPHATION
SOFT START BULK
FLOAT, FULLY CHARGED
PULSE, MAINTENANCE CHARGING
20015462E MXS 7.0, Manual EU, Print file 002.indd 3 2011-10-11 07:58:00

CTEK MXS 7.0 Specifications

General

Input voltage	220-240 V
Input frequency	50/60 Hz
Battery voltage	2 V
Cable color	Black, Red
Operating temperature (T-T)	-20 - 50 °C
Number of batteries supported	-
Product color	Black, Silver

Weight and Dimensions

Depth	191 mm
Width	89 mm
Height	48 mm
Weight	800 g

Summary

CHARGING

CHARGING PROCESS

Step-by-step guide on how to connect the charger and initiate the charging process.

CHARGING INDICATORS

Explanation of the power lamp, error lamp, and mode/program indicators on the charger.

CHARGING PROGRAMS

ERROR LAMP TROUBLESHOOTING

Guide to diagnosing issues indicated by the error lamp on the charger.

READY TO USE ESTIMATES

Table providing estimated charging times from empty to 80% for various battery sizes.

DETAILED CHARGING PROGRAM ANALYSIS

CHARGE CYCLE STEPS

Detailed breakdown of each stage in the charging cycle, including voltage and current.

CONNECTING AND DISCONNECTING

VEHICLE BATTERY CONNECTION

Instructions for connecting and disconnecting the charger to a vehicle-mounted battery.

TECHNICAL SPECIFICATIONS

Key technical data and features of the CTEK MXS 7.0 charger.

SAFETY AND SUPPORT

GENERAL SAFETY PRECAUTIONS

Important safety warnings and guidelines for using the battery charger safely.

LIMITED WARRANTY AND SUPPORT

Information on the product warranty, limitations, and customer support contact details.