CTEK MULTI XS 4003 1035 User Manual

®
MULTI XS 4003
Battery charger
For lead-acid batteries 1.2–140Ah
User’s Manual and a guide to professional battery
charging for starter/deep cycle batteries.
Model 1035
QUICK GUIDE ENDEFRESITNLSEDKNOFI

CTEK MULTI XS 4003 1035 Specifications

General

Brand	CTEK
Model	MULTI XS 4003 1035
Category	Battery Charger
Language	English

Summary

Introduction

Safety

Battery Types and Settings

Charging

Connection of the charger to batteries that are fitted in vehicles

How to connect the charger to car batteries, including chassis grounding.

Connection of the charger to batteries that are not fitted in vehicles

How to connect the charger to standalone batteries, positive and negative terminals.

Charging Steps

Desulphation

Revives sulphated batteries with pulses.

Soft start

Initial charging phase to test battery state and voltage.

Bulk

Main charging phase, delivering maximum current until 80% charge.

Absorption

Final charge phase, gradually reducing current to reach 100%.

Analysis

Tests the battery's ability to retain energy.

Recond

Reconditions deeply discharged batteries.

Maintenance charge – Float

Maintains battery charge with constant voltage.

Maintenance charge – Pulse

Maintains battery charge with pulses.

Charging Time

Temperature Protection

Maintenance

Equipment

Technical Specifications

Program Description

The Product is Protected by the Following

Limited Warranty

Declaration of Compliance