CTEK PRO120 - Ready to Use

EN • 5
SETTINGS
INFO
PRO120
MMI ver: 11.06
Module ver: 9.09
BACK
WARNING BUZZER
OFF
ON
BACK SELECT
Acoustic signal when error
occurs
DISPLAY
MODE
CONTRAST
BACKLIGHT
BACK SELECT
DISPLAY MODE
STANDARD
ADVANCED
BACK SELECT
CONTRAST
60%
BACK SELECT
BACKLIGHT
40%
BACK SELECT
LANGUAGE
ENGLISH
DEUTSCH
NEDERLANDS
FRANҪAIS
BACK SELECT
FACTORY RESET
YES
INFO
BACK SELECT
• Using a higher current than the recommendation may result in batteries not
being completely charged.
• Using a lower current than the recommendation will prolong the charging
time.
• The currents shown are the maximum recommended current for battery
charging. If a parallel consumer is connected then the current setting could
be increased.
RECOMMENDED CURRENT
12V
Current Battery size Min Battery size Max
5A 10Ah 150Ah
10A 20Ah 300Ah
20A 40Ah 600Ah
40A 80Ah 1200Ah
60A 120Ah 1800Ah
80A 160Ah 2400Ah
100A 200Ah 3000Ah
120A 240Ah 3600Ah
LOCK THE BUTTONS
Lock the buttons if charger used in public
or unattended.
Press and hold the
PRO120
PRO120
buttons for 2s
to lock/unlock the buttons.
READY TO USE
The table shows the estimated time to charge a battery from empty to 80%.
BATTERY SIZE
10Ah 40Ah 150Ah 900Ah 1800Ah 3600Ah
CHARGING
CURRENT
5A 2h 7h 24h
10A 4h 12h
40A 3h 18h
80A 2h 9h 18h
120A 6h 12h 24h
MAIN MENU
CHARGE
POWER SUPPLY
SETTINGS
SELECT
PRO120
Press to scroll up in menu and to increase values
PRO120
Press to scroll down in menu or to decrease values
PRO120
Press to activate selected program or setting
PRO120
Press to step back or stop in menu
SETTINGS
DIS PL AY
LANGUAGE
WARNING BUZZER
FACTORY RESET
BACK SELECT
50016574B CTEK PRO 120A, Manual, Print file_016.indd 3 2017-11-30 11:14:06