Instruction BookletHS-925
Figure 24
•When lever is in Drive (D) position, scooter can be driven. Normal
position is D. (Please make sure the lever is in Drive (D) position
when power on or parking.)
•When lever is in Neutral (N) position, scooter can be moved manually
without power. (Please make sure the lever is in Neutral (N) position
when you need to push the scooter.)
14
•Unlock : Turn the scooter OFF and remove the key. (see section 5-1 General operation
- main key switch) Insert the key to the switch under the seat. Turn the key clockwise
to open the seat storage box. (Figure 22)
•Lock : Press the seat down to lock.
•Do not leave your belongs in the storage box.
Seat storage box :
Figure 21Figure 19 Figure 20
•Adjust the seat to the most comfortable
position before each ride. Do not adjust
the seat when driving.
•When driving the scooter, set the seat at
foremost position to prevent tip over. Do not
hang heavy goods on the armrests.
•When opening the storage box, use the other
hand to lift up and hold the seat to prevent
the seat falling down and causing injury.
(Figure 23)
Figure 23
Figure 22
5-2 FREE-WHEELING (N-D LEVER)
•Freewheel operation is only recommended on flat surfaces. Never leave your
scooter on gradient with its motors disengaged.
•When adjusting N-D lever, do not sit on the scooter.
•It’s not able to drive the scooter when the lever is in Neutral. Turn off the scooter and
switch to D position, then turn on and drive scooter. (Figure 24)
•When pushing the scooter (in N position), the safety speed control system will be
activated and the scooter will automatically slow down if the speed is too fast.
•Please slow down and reserve a bigger space for turning. Do not make a rush turn in
high speed to avoid the possibility of a tip or fall. (see section 10. Options for option of
adding safety turning speed reduction)
5-3 SAFETY SPEED CONTROL SYSTEM
To Next Page
Loading...
