CTR Logika - Changing Oil in the Compressor and Changing Filters; Oil Containers; Charging and Service Hoses; Spare Parts

EN
Logika - use and maintenance guide
15/16
page
Qualied personnel should only carry out this operation.
We recommend that you contact our after-sales technical service centre.
The machine is supplied with one oil container for new oil injection. If it is necessary to use
more than one type of oil, then separate containers should be requested for each different
oil type.
Never mix different types of lubricant. Always check the type of oil that should
be used by a specic A/C plant (according to the type of compressor installed).
CTR s.p.a. will be happy to provide technical sheets, on request.
The machine is supplied with connecting hoses to the A/C plant of length equal to 1800 mm.
Should the standard tubing not be of sufcient length for your requirements, tubing length
equal to 3000 mm. is available at our authorised distributors.
All spare parts for LOGIKA are available at our authorised dealers and are distributed by CTR s.p.a.
This is a list of the meanings of the labels present on the machine:
Lightening symbol on bright yellow
background (indicates parts carrying
high voltage with an electric-shock hazard).
16 Labels and markings
15.5 Spare parts
15.4 Charging and service hoses
15.3 Oil containers
15.2 Changing oil in the compressor and changing lters
Indicates the type of refrigerant
compatible for the type of machine.
R134a