2/16
Logika - use and maintenance guide page
PAR. INDEX PAGE
Declaration of compliance 1
Index - Symbols key 2
1 Introduction 3
2 Technical characteristics 4
3 Warning 5
4 Electricity supply
6
5 Handling and transport
6 Controls 7
7 Menu structure - Error codes 8
8 Manual operation RECOVERY 9
9 Manual operation VACUUM 10
10 Manual operation CHARGING oil and refrigerant 11
11 AUTOMATIC operation 12
12 Refrigerant topping up 13
13 Recharging of the gas storage cylinder
14
14 Refrigerant transfer from the unit to an external container
15 General maintenance
15.1 Topping up or changing oil in the vacuum pump
15.2 Changing oil in the compressor and changing lters
15
15.3 Oil containers
15.4 Charging and service hoses
15.5 Spare parts
16 Labels
SYMBOLS KEY
DANGER: indicates situations or problems that can be a safety risk and an accident
or life-threatening hazard for people.
CAUTION: indicates situations or problems that are connected with the correct
running of the machine but are not a safety hazard for people.
NO!: do not carry out the operations indicated, as they may compromise the correct
working of the machine.
!
IMPORTANT: indicates that important instructions of a general nature should be
noted but that they do not compromise personal safety or the correct working of the
machine.
J
CORRECT OPERATION: indicates that this operating method used is correct.
L
NON CORRECT OPERATION: indicates that this operating method used is NOT
correct.
The key below illustrates the meaning of symbols used in this guide.
To Next Page
Loading...