INTRODUCTION
Recommended Use of the Monitor
When setting up and using the monitor, pay special attention to the following
for optimum performance:
• Do not use your monitor against a bright background or where sunlight or
other light sources will shine directly on the screen.
• The monitor should be placed just below eye level (10° ~ 15°) for optimum
viewing.
• Set the monitor's brightness to match the ambient room light.
• For optimum focus, the contrast control should not be set to the maximum
level unless the input signal level is extremely low. Also, the brightness
control should be set to a point where the overall background area just
begins to disappear.
• Allow adequate ventilation around the monitor so that the heat from the
monitor can properly dissipate.
• Neither the monitor itself, nor any other heavy objects, should rest on the
power cord. Damage to the power cord can cause fire or electrical shock.
о Keep the monitor away from high-capacity transformers, electrical motors,
or other strong magnetic fields.
• Your monitor should not be used in damp, dusty, or dirty areas.
• Handle your monitor with care when transporting it.
CAUTION
• Do not scrap or knock the surface of CRT with a pen, a screwdriver
and so on.
• Clean the CRT surface with a lint-free, nonabrasive, soft cloth,
and should not use the solution or glass cleaner containing
corpuscles like an abrasive, alcohol and an alkaline solution.
7
• • •
To Next Page
Loading...
