Cub Cadet 700 Series VTT User Manual

Troubleshooting
8
18
Problem Cause Remedy
Tines do not engage 1. Foreign object lodged in tines.
2. Tine hardware missing.
3. Pulley and idler not in correct adjustment.
4. Belt worn and/or stretched.
1. Dislodge foreign object.
2. Replace tine hardware.
3. Take tiller to authorized service dealer.
4. Replace belt.
Wheels do not engage 1. Nut and bolt missing
2. Belt worn and/or stretched.
1. Replace nut and bolt.
2. Replace belt.
Engine does not start 1. Power switch in OFF position. 1. Place the power switch in the ON position.

Cub Cadet 700 Series VTT Specifications

General

Brand	Cub Cadet
Model	700 Series VTT
Category	Tiller
Language	English