Cub Cadet Challenger 500 Service Manual

Chassis
5‐40
Installing the Front Bridge
1. Install the right and left transmission
shafts into the front bridge
differential.
2. Fill with 0.32L 80w90 gear lube and
tighten the filler bolt.
23 Nm (2.3m · kg, 17 ft · lb)
3. Install the front bridge differential
onto the frame
 2 Bolts 10mm X 110mm
 2 Nuts 10mm
 2 flat gaskets
Fastening Torque of the Bolt 40-
45 Nm , 29-33 ft · lb)

Cub Cadet Challenger 500 Specifications

General

Brand	Cub Cadet
Model	Challenger 500
Category	Utility Vehicle
Language	English