Cub Cadet Challenger 500 Service Manual

Chassis
5‐63
Checking the Fuel Pump Operation
1. Remove the driver’s seat,
passenger’s seat, console, and the
right protector
2. Place a container under the end of
the fuel hose (1).
3. Turn the ignition switch to the run
position. Do not start the engine.
4. Fuel should start running out the
hose.
5. Turn the key to the off position.
6. Attach the fuel line back to its
original position.
7. Install the console, heat shield,
passenger’s seat, driver’s seat.

Cub Cadet Challenger 500 Specifications

General

Brand	Cub Cadet
Model	Challenger 500
Category	Utility Vehicle
Language	English