Specifications
2-22
CHASSIS TIGHTENING TORQUE
Part to be Tightened
Thread
Size
Torque
Nm
Torque
Ft
Lbs
Steering knuckle and front lower arm 12 mm 30 22
Tie-rod locknut 12 mm
40
29
Steering knuckle and tie-rod 12 mm 39 28
Front lower arm protector board and front lower arm 6 mm
7
5.1
Seat belt and frame 10 mm 59 43
Seat belt and ceiling (enclosure) 7/16 59 43
Front wheel and front wheel hub 10 mm 55 40
Front wheel hub and constant velocity joint of half shaft 20 mm 260 190
Steering knuckle and brake disc guard 6 mm
7
5.1
Front brake caliper and front wheel steering knuckle 10 mm 48 35
Front brake hose union bolt 10 mm 27 19
Front brake hose holder and steering knuckle 6 mm
7
5.1
Front brake hose holder and front upper arm 6 mm
7
5.1
Front brake hose holder and frame 6 mm
7
5.1
Front brake pad holding bolt 8 mm 18 13
Front brake disc and front wheel hub 8 mm 30 22
Front brake caliper bleed screw 6 mm
6
4.3
Rear wheel and rear wheel hub 10 mm 55 40
Rear wheel hub and constant velocity joint of half shaft 20 mm 260 190
Rear brake hose and frame 6 mm
7
5.1
Brake pipe and brake master cylinder 10 mm 19 13
Pedal holder assembly and frame 8 mm 16 11
Brake master cylinder and pedal holder assembly 8 mm 16 11
Secondary brake master cylinder kit stopper bolt 6 mm
9
6.5
Brake rod locknut 8 mm 17 12
Rear brake disc and brake disc Install seat 6 mm 10 7.2
Rear brake pad holding bolt 8 mm 17 12
Rear brake caliper and Install seat 10 mm 40 29
Rear brake hose union bolt 10 mm 27 19
Parking brake case and rear brake caliper 8 mm 22 16
Parking brake lever assembly and frame 6 mm
7
5.1
Rear brake caliper bleed screw 6 mm
5
3.6
Cargo bed release lever 6 mm 11 8.0
Rubber pad and cargo bed assembly 8 mm 16 11
Hinge cover and cargo bed assembly
—
7
5.1
Cargo bed plastic panel and cargo bed assembly 6 mm
7
5.1
Rear mud guard and cargo bed assembly 6 mm
7
5.1
Front bumper protector board and front bumper 6 mm
7
5.1
To Next Page
Loading...
Need help?
General
