Cub Cadet GT 2544 User Manual

57
GT 2544
2-1/8 gallons
4 pints
6 qts.
0 to 6 mph
0 to 3 mph
Kohler Command
20 HP
2
3.03 in.
2.64 in.
38.1
1200 RPM
3600 RPM ± 75
Battery
.030 in.
12 volt neg. ground
725-1707D
15 amp regulated
25 amp
725-0963
Internal expanding
16 x 6.5-8
23 x 9.5-12
31.5 in.
30.25 in.
47.00 in.
72.00 in.
49.00 in.
42.00 in.
6.00 in.
28.0 in.
CAPACITIES
Fuel Tank ........................................................................
Crankcase (approximately) .............................................
Transmission Case (approximately) ................................
HYDROSTATIC DRIVE
Speed: Forward................................................................
Reverse ................................................................
ENGINE
Make and Model ..............................................................
Horsepower .....................................................................
Cylinders .........................................................................
Bore .................................................................................
Stroke ..............................................................................
Displacement (cubic inches) ...........................................
Engine Speed (governed)
Low Speed ...................................................................
High Speed (no load) ...................................................
Ignition .............................................................................
Spark Plug Gap (Cub Cadet No. 759-3336) ....................
ELECTRICAL SYSTEM
System Voltage ...............................................................
Battery .............................................................................
Alternator .........................................................................
Fuse (auto type) ..............................................................
Head Lamp Bulb ..............................................................
BRAKES ............................................................................
TIRE SIZES
Front ...............................................................................
Rear .................................................................................
DIMENSIONS
Tread:
Front with 16 x 6.5-8 tires .............................................
Rear with 23 x 9.5-12 tires ...........................................
Wheelbase ......................................................................
Length, over all ................................................................
Width, over all (w/ mower deck - chute up) .....................
Height, over all (to top of steering wheel) ........................
Ground Clearance ...........................................................
Turning Radius ................................................................
SPECIFICATIONS
Specifications are subject to change without notice.

Cub Cadet GT 2544 Specifications

General

Transmission Type	Hydrostatic
Cutting Width	44 inches
Drive	2WD
Cutting Height	1.5 - 4 inches
Number of Blades	2
Tire Size (Front)	16 x 6.5-8
Turning Radius	18 inches
Tire Size (Rear)	23 x 10.5 inches