EasyManuals Logo

Cub Cadet RZT54 User Manual

Cub Cadet RZT54
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Driving the Tractor In Reverse
WARNING! Always look behind and down on both
sides of the tractor before backing up. Always look
behind while traveling in the reverse direction.
Slowly and evenly move both drive control levers rearward. 
The tractor will start to move in the reverse direction. See

As the control levers are pushed farther rearward the speed 2.
of the tractor will increase.
To slow the tractor move the controls lever forward to 3.
attain the desired speed, or move the levers to the neutral
position to stop the tractor.
Turning While Driving Rearward
To turn the tractor while driving rearward, move the control
levers as necessary so that one lever is forward of the other. The
tractor will turn in the direction of the forward control lever.
To turn to the left while traveling in reverse, move the left 
drive control lever forward of the right lever. See Figure 5-7.
To turn to the right while traveling in reverse, move the 2.
right drive control lever forward of the left lever. See Figure
5-8.
The greater the fore-to-aft distance between the two 3.
levers, the sharper the tractor will turn.

lever to the neutral position, while moving the other
control lever rearward.
NOTE: 
the potential for defacement of the turf.
Neutral
Position
Slower
Faster
Figure 5-6
Rearward Left Turn
Figure 5-7
Rearward Right Turn
Figure 5-8
19se c t i O n 5 — Op e r a t i O n

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet RZT54 and is the answer not in the manual?

Cub Cadet RZT54 Specifications

General IconGeneral
Engine Power24 HP
Engine BrandKohler
Engine Displacement725cc
Cutting Width54 inches
Fuel Capacity3.5 gallons
TransmissionHydrostatic
Deck ConstructionFabricated
Blades3
Deck MaterialSteel
Turning Radius0 inches
Warranty3-year limited

Related product manuals