Front
Skirt
Inner
Baffle
Discharge
Baffle
Cutting
Blades Gauge Wheels Front Roller Rear Rollers
Standard set-up
Low installed installed Hi-lift Low = 3" to 5" Low = 3" to 5" Low = 3" to 5"
Stems (Dandelion, Bahia,
Buckhorn, etc.)
Med removed installed Hi-lift
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
Very lush &/or tall grass
High removed installed Hi-lift
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
Low cut height (1" to 2")
Med installed installed Low-lift High = 1" to 2 1/2" High = 1" to 2 1/2" High = 1" to 2 1/2"
Mulch
Low installed removed Hi-lift/mulch
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
Material Collection
Low installed installed Hi-lift
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
Abraisive (sandy), dry
Low
removed
installed Low-lift
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
Wet
Low installed installed Hi-lift
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
High = 1" to 2 1/2"
Low = 3" to 5"
Adjustable Front Skirts
- When "Low", increases lift for precision cutting. When "High", grass rebounds & can cut high volume grasses.
Removable Inner Flow-Control Baffle
- Regulates discharge (remove for high volume grasses, and install for precision cutting).
Removable Discharge Baffle
- Enhances the discharge spread pattern. Reduces clumping (it should be removed for mulching).
Notes:
This is a general outline of suggested settings, so keep in mind that your conditions may be different.
To avoid damage to grasses, no more than 1/3 of the height should be removed at one cutting (if 6" tall, cut to 4").
Adjustable Gauge Wheels - Reduces scalping, helps provide precision cutting, and reduces turf defacement during turns.
Adjustable Rear Rollers
- Reduces scalping, and provides the striped appearance.
Cutting Blades
- Create lift (axial flow), cutting action, and discharge (centrifugal flow). Low to High lift depending on the sail shape.
Discharge Chute
- Controls the output (including thrown objects) and enhances the discharge pattern.
To Next Page
Loading...
Need help?
General
