Cub Cadet Ultima ZT1 42E - Right Lap Bar Calibration

Instruction Sheet 7 of 8
INSTRUCTION SHEET
DRM
16. Simultaneously press and hold the PTO
the HEADLIGHT
buttons for 7 seconds or
and HEADLIGHT
14. For the right side lap bar calibration, proceed as follows.
15. Place both lap bars in the “OUTWARD” position as
FIGURE 11
and
until the screen displays F N R as shown in Figure 11,
then release the PTO
buttons.
FIGURE 10
Lap Bars In The
“OUTWARD”
Position
shown in Figure 10.
769-26105/01