Cub Cadet Z-Force S60 - Cleaning, Lubrication, and Deck Washing

Section 6 — Maintenance & adjuStMentS
Lubrication
WARNING! 

brake, stop engine and remove key to prevent
unintended starting.
Front Wheels
Each of the front wheel spindles and rims is equipped with a grease

applied with a grease gun after every 25 hours of tractor operation.
Grease
Fittings
Figure 6-3
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
 Attach the hose coupler to the water port on your decks
surface. See Figure 6-2.
Nozzle Adapter
Adapter Lock Collar
Deck Wash Nozzle
Figure 6-2
4. Turn the water on.
5. 
the engine and place the throttle lever in the FAST
position.
6. 
7. 
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
8. 
position.
 

 Turn the water off and detach the hose coupler from the

 


deck running for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly dry.
21