To facilitate the hose routing, the front cover of the
storage box can be removed by pulling rmly.
Prior to installation, we recommend you remove
the hoses from their packaging to enable them to
straighten back out.
1.
Trim the hoses down to the required length.
2.
Remove the in-frame hydration cover by the
bottom bracket.
3. Thread the hoses from the top tube through the
down tube to the in-frame hydration area by the
bottom bracket
4. Select the correct hydration bladder for your
frame size (XS-S/M-L) and connect it to the
hoses.
5.
Insert the hydration bladder into the frame.
To Next Page
Loading...
