Cube Fold Hybrid - Folding Process; Pre-Folding Safety and Preparations; Initial Folding Steps: Stem and Seatpost

3
Faltmechanismus CUBE Fold Hybrid
2 Folding process
WARNING
The e-bike system must always be
switched o before starting the
folding process.
Failure to do so may result in the
motor assistance of the e-bike system
kicking in and causing injury.
NOTICE
Before starting the folding process
and for transport in the folded state,
remove any luggage from the bike.
NOTICE
To get a smaller pack size of the
bike when needed, the pedals can be
folded.
1.
Park your bike safely on the kickstand.
Fig. 1: bike on kickstand
2. Fully retract the seat post and the height-adjust‐
able stem by using the quick-release levers.
Fig. 2: Draw in Seatpost + stem
3.
Fold the stem as shown in the following gures.
🡆
Unlock the safety lever (1) of foldable stem by
pushing the round unlocking button (2).
2
🡆
Fold down the stem together with the han‐
dlebars.
Fig. 3: Fold stem