Cubic COM5000-8 User Manual

351804-1 Rev. 100
COM5000-8 TECHNICAL MANUAL
Instruction and Maintenance Manual
COM5000-8
HF-SSB 5-kW Linear Power Amplifier
THIS DOCUMENT CONTAINS DATA WHICH IS PROPRIETARY TO, OR A TRADE SECRET OF, CUBIC
DEFENSE APPLICATIONS, INC. THIS DOCUMENT AND THE DATA CONTAINED THEREIN SHALL
NOT BE USED, DUPLICATED, DISCLOSED OR ALTERED WITHOUT THE EXPRESS WRITTEN CONSENT
OF CUBIC DEFENSE APPLICATIONS, INC. NO RIGHT, TITLE, OR INTEREST IS GRANTED, EXPRESSLY
OR BY IMPLICATION, IN OR TO ANY DATA CONTAINED HEREIN BY VIRTUE OF ITS DISCLOSURE
TO OR USE BY THE HOLDER/RECIPIENT. DISCLOSURE MAY NOT BE MADE TO ANY THIRD
PARTY FOR ANY PURPOSE. ALL STATUTORY AND COMMON LAW RIGHTS ARE HEREBY RESERVED.
Cubic Defense Applications, Inc.
9333 Balboa Ave
San Diego, CA. 92123
Telephone: (858) 505-2024 Telefax (858) 505-1593
Manual Part No. 351804-1

Cubic COM5000-8 Specifications

General

Brand	Cubic
Model	COM5000-8
Category	Amplifier
Language	English

Summary

Transmitter Performance Specifications

Key Technical Parameters

Details frequency range, power output, gain flatness, and other technical specifications.

Scope of Manual and Safety Precautions

General Safety Information

Provides essential safety precautions for operating and maintaining the equipment.

Chapter 2: Installation

2.1 General Installation Procedures

2.1.4 Rack Cabinet Installation

Detailed steps for installing the transmitter rack cabinet and its modules.

Chapter 3: Operation

3.3 Transmitter System Operation Modes

Details transmitter operation modes (AMP OFF, STDBY, OPER) and keying.

3.3.4 Continuous Built-In Test (BIT)

Chapter 5: Maintenance

5.4 Module and Subassembly Maintenance

Procedures for maintaining individual modules and subassemblies.

5.4.1 PA Module Maintenance

Maintenance and alignment for the 1.25kW PA Module and its components.

5.4.3 System Controller Module Maintenance