EasyManua.ls Logo

Cuddeback Ambush - Checking; Menu Position; Battery Level; Clr (Clear SD Card)

Cuddeback Ambush
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
theSDcarduntiltheLEDisOFF.After the image is
saved to the SD card, the LCD will display the delay
settingandbegincountingdown.Oncethecounter
reaches0,Ambush
®
is ready to record the next image.
Step 7 – Checking
Ambush
®
When you check
Ambush
®
it is not necessary to turn the
rotary knob. Instead, press the A or B button to temporarily
suspend Armed mode and view pertinent information,
such as the number of images on the SD card and battery
level.EachtimeyoupresstheAorBbuttonnew
information will be displayed. Here is the sequence of
information that is displayed each time the A or B button
is pressed.
1) ImagesonSDcard.NotetheARMED,DWELL,
andIMAGESiconsaredisplayed.
2) FreeSpaceonSDcardinMB.NotethatARMED
andDWELLiconsaredisplayed.
3) BatteryLevelasapercentage.Forexample,
bt:99meansthereis99%batterypowerleft.
4) Time
5) Date
6) Year
7) Test indicates
Ambush
®
is in Test mode and will
illuminatetheredTestLEDwhenactivityissensed.
8) PressingAorBagainwillArmthecameraand
the current delay setting will be displayed.
11
You can leave Ambush
®
inanyofthestates1thru7and
Ambush
®
willautomaticallyre-arminaboutveminutes.
This allows you to close the cover and leave the area
without triggering an image.
Step 8 – More Features
Menu Position
TurntherotaryknobtotheMENUpositiontoperform
various activities. Press A to advance to the next menu
item, press B to activate the displayed menu action.
1) Battery Level – the battery level is displayed in the
format bt:99, which is a percentage of remaining
battery power. Press the A button to advance to the
next menu item.
2) CLr(ClearSDcard)–Thismenuallowsyouto
clear all images and content on the SD card. Press
and hold B to clear
the card. The worm will
appearandtheLEDswillashRED.
When finished,
the LCD will display the amount of space on the SD
card in MBs. Press A to advance to the next menu item.
3) Pic – Lets you take a test picture. Press B to take
a picture. Press A to advance to the next menu item.
4) Ambush
®
: FLSH-Thismenuallowsyoutotest
Ambush’sash.PressBtochargetheashcircuit.
TheLCDwillbegincountingdownfrom30.After
 the30secondcountdowntheLEDwillashgreen
toindicatethattheashischarged.PressBagain
toretheash(CAUTION-lightoutputfromthe
ashisverybright!).
10

Related product manuals