Cuisinart CLERMONT - Attaching Components

ASSEMBLY INSTRUCTIONS
13
STEP 10
-----------------------------------------------------------------------------------
Secure the Main Housing to the Cart Assembly using 4x Lock Screw (C) on the four vertical tabs from the •
Cart Brackets.
Secure the Left Support Brace (26) and Right Support Brace (27) to the Cart Assembly and Main body using •
4x Lock Screw (C).
STEP 11
-----------------------------------------------------------------------------------
From the inside of the Main Body (1) insert the Ash Cleaning Rod (50) through the hole to the outside of the •
main body. Noting the orientation of the flat plate, insert the Ash Cleaning Rod (50) into the Auger Assembly
(47) below the Fire Pot Assembly (52).
Note components 47 and 52 are pre-assembled in the Main Body (1)•
C
x 8