7
blade over the work bowl center shaft.
Line up the markings on the blade hub
with the motor shaft. Blade should fit
snugly and rest on the bottom of the
work bowl.
3. Add desired ingredients to work bowl.
4. Place work bowl cover onto work bowl,
with the handle area just to the left of
center. Turn counterclockwise to
lock onto work bowl.
5. Align pusher assembly and activating
rod with the feed tube opening on the
work bowl cover and slide the activating
rod down to the bottom.
6. You are now ready to operate the
machine.
Disc Operation
1. Plug in the housing base and place the
work bowl on top, with the work bowl
handle just to the left of center. Turn the
work bowl counterclockwise to lock it
onto the housing base.
2. Choose desired disc and place
underside-up on tabletop. Pick up
detachable disc stem and align it with
the raised plastic crescent on the disc
underside. The raised “lock” indicator
on the left corner of the stem should be
to the left of the mounting plate on disc.
3. Turn the stem to the right, so the
locking tabs are covered by the metal
supports and a ‘click’ locks the stem in
place.
4. With the stem facing down, place the
assembly over the center hub. It should
fit snugly and rest on the bottom of the
work bowl.
5. Place work bowl cover onto work bowl,
with the handle area just to the left of
center. Turn counterclockwise to
lock onto work bowl.
6. Align pusher with the feed tube opening
on the work bowl cover and slide the
activating rod down to the bottom.
7. Use the cord wrap on the underside of
housing base to add or remove cord.
8. You are now ready to operate the
machine.
MACHINE FUNCTIONS
PULSE
1. With the machine properly assembled
and engaged, and ingredients in the
work bowl, press the PULSE button
repeatedly as needed.
ON (continuous)
1. Properly assemble and engage the
machine.
2. To add ingredients through the feed
tube, remove the pusher and fill the
feed tube as directed (see “Preparing
for slicing or shredding”).
3. Engage the pusher and press the ON
button. The button light will turn on and
the motor will start.
4. Press the pusher firmly down until all
ingredients have passed into the work
bowl. Remove the pusher and refill
ingredients as needed. When you
engage the pusher again, the
unit will automatically turn on.
5. Press the OFF button when finished.
DOUGH button
1. Prepare the dough ingredients and
place in work bowl.
2. Properly assemble and engage the work
bowl cover and pusher.
3. Press the DOUGH button and the light
will turn on.
4. Then press the ON or PULSE buttons
as needed to process DOUGH. The ON
light will turn on.
5. Press the OFF button when finished.
OPERATING
INSTRUCTIONS
Try chopping some practice foods,
such as a zucchini or potato, before
you process food to eat. First, cut the
ingredients into 1-inch (2.5 cm) pieces of
even size and length.
• Place the work bowl over the center
stem, with the handle area just to the
To Next Page
Loading...
Need help?
General
