11
B CHARGING INSTRUCTIONS
To charge your Cuisinart Seasoning Mill for use:
Follow the instructions under the Assembly
section.
Grasp assembled unit securely and make
sure it is facing upright. The Seasoning Mill
is facing upright when the Cuisinart logo
on the front of the unit is in proper reading
orientation (easy to read and horizontal.)
Place the fully assembled Seasoning Mill
in the charging base so that the recessed
area on the back of the unit housing fits
comfortably with the protrusion on the
charging base.
Plug charging base into a power socket. The
unit is now charging for use. NOTE: Unit is
properly charging if the red LED illuminates
on the charging base. When the unit is fully
charged, the LED indicator will change to
blue.
NOTE: Before first use, the batteries must be
charged for 12 hours.
C ADJUSTING THE GRIND
To adjust the grind from fine to coarse, use the
adjustment dial on the underside of the mill. Turn
clockwise for a finer grind and anticlockwise for
a coarser grind, following the arrows on the mill.
To Next Page
Loading...
