9
Instructions for Use
A ASSEMBLY
Place housing and all removable parts on a
clean, flat surface. Make sure that all parts
have been cleaned and dried thoroughly
before assembling.
Attach grinding container(s) to the unit
housing. NOTE: It is best to attach the
grinding container from the bottom while
holding the unit upright.
Line up the arrow on the grinding container
with the arrow on the unit housing. NOTE:
Both arrows should face each other. This will
indicate the grinding container and unit are
properly aligned.
Gently push the grinding container and unit
housing together. The grinding container
will fit together comfortably with the unit
housing.
Secure the grinding container in place by
twisting the grinding container so that the
arrow on the unit housing is now aligned
with the lock symbol on the grinding
container. NOTE: The two pieces will click
together indicating proper assembly.
To attach the second grinding container, flip
the unit housing over and repeat assembly
instructions.
Your Cuisinart Seasoning Mill is now
assembled.
To Next Page
Loading...
