Need help?Do you have a question about the Culligan CTM-150K and is the answer not in the manual?
General| Brand | Culligan |
|---|---|
| Model | CTM-150K |
| Category | Water Dispenser |
| Language | English |
Covers materials, sizing kits, locating, distribution system, and loading media.
Covers tank adapter, valve mounting, adapters, piping, bypass, and suggested piping.
Covers drain line, flow control, PRV, eductors, brine refill, brine system, and pilot valve tubing.
Covers mounting the controller.
Details on preparing for wiring and routing cables safely.
Instructions for wiring the power cord and 24V transformer.
Procedure for pressurizing the media tank with water.
Guidance on filling the brine tank with salt and water.
Steps for sanitizing the water softener system.
Checklist to ensure the system is properly installed before handover.
Precautions for protecting the unit's appearance and operation.
Three basic steps to analyze and identify system problems.
Covers drain line flow control, brine system analysis, and brine draw/slow rinse times.
Covers general problems, valve operation, and piston locations.
Diagnosing issues with the Aqua-Sensor sensing device.
Illustrates water flow paths for service, backwash, brine draw, fast rinse, and refill cycles.
To Next Page