Need help?Do you have a question about the Culligan CTM-60K and is the answer not in the manual?
General| Capacity | 60, 000 gallons |
|---|---|
| Filter Life | 60, 000 gallons |
| Reduces | Chlorine, taste, and odor |
| Type | Whole House |
| Filtration Technology | Carbon filtration |
Lists operational parameters like pressure, temperature, water clarity, and voltage for proper function.
Provides detailed flow rate specifications (gpm) for various CTM softener models.
Lists the necessary components for installing a CTM Softener, excluding timeclock models.
Describes the procedure for loading Cullex and Cullsan media into the tank, including quantities and freeboard.
Step-by-step guide for mounting the control valve onto the tank adapter, with cautions.
Guidance on installing piping, emphasizing unions, isolation valves, and plumbing practices.
Details on drain line installation, including discharge height, siphon break, and air gap requirements.
Instructions for connecting the power cord and 24V transformer to the Smart Controller, with cautions.
Instructions for installing and setting up the Aqua-Sensor probe, including probe positioning and regeneration.
Procedure for pressurizing the media tank, purging air, and checking for leaks.
Outlines a three-step process to analyze system problems and identify potential causes.
Step-by-step guide to safely depressurize the system before performing any service or repair.
Diagnosing brine system issues based on water level in the brine tank and rod travel.
Common problems, check procedures, and causes for issues like leaks, high flow, and piston malfunction.
Procedures to diagnose Aqua-Sensor problems, including recording data and checking sensor operation.
To Next Page