To Next Page
A
Amy ObrienJul 26, 2025
How to fix loss of water pressure in my Culligan GOLD Water Dispenser?
- DDaniel HuffJul 26, 2025
A loss of water pressure in your Culligan Water Dispenser can be caused by a few issues. The control and/or resin bed may be plugged with debris or iron build-up; clean the control and increase the frequency of regenerations or length of backwash, and plant recondition if necessary. Alternatively, the inlet manifold could be plugged; remove the control from the tank and clean the inlet manifold, also checking if the eductor screen/nozzle are plugged. Lastly, the control may be plugged with foreign material from recent plumbing work; clean the control.
General
