Quick Programming Guide 115
Cat. No. 01023095
Quick Programming Chart—First Time Setup with Flow Trigger Flush
Press to select a setting. Press or to change the setting. Press to save. Press
to exit from a menu.
Select Language
LANGUAGE
ENGLISH
Select the controller language.
FIRST TIME SETUP
PRESS DOWN ARROW
From the FTS screen, press
to scroll to the date/time
settings.
Set Up Date
SET
MONTH JAN
Set the Month, Day, and Year.
SET
DAY 1
SET YEAR
2012
Set Up Clock Type and Time
CLOCK TYPE
12 HR
Select either a 12-hour clock
(12:00A–11:59P) or 24-hour
clock (00:00–23:59)
SET HOUR
12PM
NOTE 24-hour clock
format does not
require AM or PM
SET
MINUTES 1
Set Up System Status at Startup
POWERON MODE
OFFLINE
Select the system status at
startup—offline or running. You
can change status after setup.
Set Up Units of Measure/Initialize System
SYSTEM UNITS
US INCH
Select METRIC for units out-
side the United States.
RUNNING
JAN-01-12 12:01P
The “home” screen displays
the RUNNING or OFFLINE
status of the RO system.
Set Up Flush Modes
1)GOTO RUNNING
2)GOTO OFFLINE
3)INFORMATION
>4)SETUP
Press to scroll to 4)SETUP
and press
for setup menu.
1)TIME/DATE
2)LANGUAGE
3)POWERON MODE
>4)FLUSH MODES
Select 4)FLUSH MODES.
1)START UP
2)STANDBY
3)TIME TRIGGER
>4)FLOW TRIGGER
Select 4)FLOW TRIGGER.
FLOW TRIG MODE
ON
Change the setting to ON.
FLUSH DURATION
20
MINUTES
Select the flush duration.
FLUSH EVERY
1000
GALLONS
Select the TDS level that will
trigger a quality flush.
Press
to save the settings and return to the
home screen.
To Next Page
Loading...
Need help?
General
