First Time Set Up 17
Cat. No. 01023095
First Time Set Up
First Time Setup Procedure
If at any time you need to re-run the First Time Setup, refer to “Menu Default—Rerun First Time Setup” on page 19.
After completing the plumbing connections to the water softener, turn on and program the Global RO Controller.
Select Language (English, French, Italian, Spanish)
LANGUAGE
ENGLISH
1. Apply power to the unit. When a new controller is first turned on, the screen dis-
plays LANGUAGE. Press
or and then to change the value and be-
gin first time setup in your preferred language.
NOTE You also can change the language setting after first-time setup from
the Setup menu. See page 22.
Serial Number
FIRST TIME SETUP
PRESS DOWN ARROW
1. Plug in the wall transformer. When a new controller is first turned on, the screen
displays FIRST TIME SETUP. Press
.
S/N:00012345
FWR***LT04
MON DD YEAR
2. The screen displays the serial number and firmware version and date installed for
this GROC. Press
to accept this information. The screen displays the first set-
ting, month.
NOTE The S/N, firmware, and date displayed in this manual are examples only.
NOTE If this unit will be installed with a modem, it is required that this electronic serial number be reported to
Culligan on the IQR form.
Setting Up Date and Time
SET
MONTH JAN
1. The screen displays the month setting. Press to accept this information and
view the day setting.
SET
MONTH >JAN
2. Press to select the item. The screen displays a cursor next to the value. This
indicates that the value may be changed by pressing the
or button.
SET
MONTH >FEB
3. Press to select a new value. The screen displays the new setting value next to
the cursor.
4. Press to select the next available value. You may press or to scroll
through all available options for this setting.
To Next Page
Loading...
Need help?
General
