Culligan M2 Series User Manual

22 Culligan® Series M2 Reverse Osmosis
22 Cat. No. 01023095
Screen Display Range Procedure
SET YEAR
2012
2010–2040
3. The screen displays the year setting. Press
or and
then
to change the value and see the next setting.
CLOCK TYPE
12 HR
12 or 24
4. The screen displays the clock type setting. Press
or
and then to change the value and see the next setting.
SET HOUR
12PM
12AM–11PM
5. The screen displays the hour setting. Press
or and
then
to change the value and see the next setting.
SET
MINUTES 25
0–59
6. The screen displays the minutes setting. Press
or
and then
to change the value and see the next setting.
DAYLIGHT SAVING
YES
YES
NO
7. The screen displays whether you observe daylight savings
time where the RO unit is installed. Press
or and
then
to change the value and return to the Time/Date
menu.
RUNNING
JAN-01-12 12:01P
8. Press to return to the home screen.
Set Up Language
Use the language setting to change the displayed language on the RO controller.
NOTE Ensure the units of measure (US, Metric) are appropriate. See page 18 to change if necessary.
RUNNING
JAN-01-12 12:01P
1. From the default home screen, press . The screen displays the main menu.
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
2. Press to scroll to 4) SETUP.
3. Press to select the SETUP menu.
1) TIME/DATE
>2) LANGUAGE
3) POWERON MODE
4) FLUSH MODES
4. Press to select 2)LANGUAGE. The screen displays the last selected lan-
guage of the RO controller.

Culligan M2 Series Specifications

General

Brand	Culligan
Model	M2 Series
Category	Water Filtration Systems
Language	English