4948
Firmware Upgrade
This ash supports rmware upgrade through the USB port. Up-
date information will be released on our ofcial website.
• USB connection line is not included in this product. The
USB port is a standard Micro USB socket. Common USB
connection line is applicable.
Checking the version: Press the < MODE > Button and the turn
the ash on. Then, the rmware update version (e.g. Version 1.0
will read U-1.0) will be displayed on the LCD panel.
Technical Data
Model CUlight FR 36C
• Type
Compatible Cameras Please reference to compatible cam-
era models
Guide No. (1/1 output @ 105mm) 36 (m ISO 100)
Flash Coverage 24 to 105mm
• Auto zoom (Flash coverage set au-
tomatically to match the lens focal
length and image size)
• Manual zoom
• Swinging/tilting ash head (bounce
ash): 0 to 270° horizontally and -7°
to 90° vertically
Flash Duration (t0.1) 1/350 to 1/20000 seconds
• Exposure Control
Exposure control system TTL autoash and manual ash
Flash exposure compensation (FEC) Manual. FEB: ±3 stops in 1/3 stop
increments (Manual FEC can be
combined.)
Sync mode High-speed sync (up to 1/8000 sec-
onds), rst-curtain sync, and sec-
ond-curtain sync
Multi ash Provided (up to 90 times, 90Hz)
• Wireless Flash (2.4G radio transmission)
Wireless ash function Master, Slave, Off
Controllable slave groups 3 (A, B and C)
Transmission range (approx.) ≤30m
Channels 16 (1~16)
• Auto Focus Assist Beam
Effective range (approx.) Center: 0.6~4m
Periphery: 0.6~2.5m
• Power Supply
AA batteries Ni-MH batteries (recommended) or
2*LR6 alkaline batteries
Recycle time Approx. 0.1-2.2 seconds (eneloop
Ni-MH batteries of Panasonic). Red
LED indicator will light up when the
ash is ready.
Full power ashes Approx. 210 (2500mA Ni-MH bat-
teries)
Power saving Power off automatically after approx.
90 seconds of idle operation. (60
minutes if set as slave)
• Sync Triggering Mode Hotshoe, optic triggering
• Dimensions
W x H x D 140*62*38 mm
Weight without battery 200g
FR36_BDA_Canon 171005.indd 48-49 06.10.2017 15:08:03
To Next Page
Loading...
