2928
Foreword
Thank you for purchasing this product.
This CUlight FR 36C camera ash applies to Canon series camer-
as and is compatible with TTL autoash. With this TTL compatible
ash, your shooting will become simpler. You can easily achieve
a correct ash exposure even in complex light-changing environ-
ments. This camera ash features:
• GN36 (m ISO 100, @105mm).
• Fully support Canon E-TTL II camera ash. Workable as Master
or Slave unit in a wireless ash group.
• With built-in 2.4GHz wireless remote system to support trans-
mitting and receiving.
• Provided multiple functions, include manual ash, multi ash,
HSS (up to 1/8000s), second curtain sync, FEC, etc.
• Support with rmware upgrade.
For Your Safety
Always keep this product dry. Do not use in rain or in damp
conditions.
This product contains high-voltage electronic parts. Touching
the high-voltage circuit inside it may result in electric shock.
Do not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
Stop using this product if it breaks open due to extrusion, fall-
ing or strong hit. Otherwise, electric shock may occur if you
touch the electronic parts inside it.
Do not re the ash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur. When taking pictures for babies, keep the ash unit
at least 1 meter (3.3 feet) away from them. Using bounce ash
to reduce light intensity is also recommended.
Do not use the ash unit in the presence of ammable gases,
chemicals and other similar materials. In certain circumstanc-
es, these materials may be sensitive to the strong light emit-
ting from this ash unit and re or electromagnetic interfer-
ence may result.
Do not leave or store the ash unit in places where the ambi-
ent temperature reads over 50°C (e.g. in automobile). Other-
wise the electronic parts may be damaged.
FR36_BDA_Canon 171005.indd 28-29 06.10.2017 15:07:58
To Next Page
Loading...
