Getting started | JetScan
®
150 currency scanner | 9
Main screen key Description
CONT
Press to start the motor.
MANUAL
Press to prompt a screen that is used to input mutilated
notes that could not be processed.
Press ADD and then press the specic denomination to
enter the value of a note. Press ADD repeatedly to enter
that note more than once.
Press SUB to remove a note’s value from the screen.
Press SUB repeatedly to remove a note’s value more
than once.
REJECT REASON
Press to prompt a screen displaying all rejected notes
and their respective error codes.
TOTALS
Press to prompt a screen displaying three levels of
accumulated totals: TOTALS, SUB TOTALS and GRAND
TOTALS.
These categories can be dened for any level of
tracking, such as teller (TOTALS), shift (SUB TOTALS)
and day (GRAND TOTALS) reporting.
STRAP
Press to prompt the STRAP SETTINGS screen, where
strap limits are set.
MODE
Press to prompt the MODE SELECTION screen, which
displays all processing modes.
MENU
Press to prompt the MAIN SUB-MENU, which provides
access to additional menus.
Press OLD/NEW on the MAIN SUB-MENU to enable
series separation. The rst note processed determines
the series. All other series of that denomination (STRGR
mode) or denominations (MIX mode) will be rejected
and uncounted.