CUMMINS ALLISON Universal JetScan 4166 User Manual

19
These two screens will sequentially flash:
Code
Possible Causes
MG, ML, MR, Z1, Z2
• Incorrect-ink error
• Worn note
UV
• Incorrect note paper
• Soiled note
•
Taped note
FL
• Incorrect note paper
• Machine-washed note
• Taped note
TH*
•
Thread error
* This code only appears on past models equipped with a thread sensor.
SUSPECT DOCUMENT
ML
CHECK NOTE
PRESS KEY
Condition
Action
Universal JetScan sensors have
detected a possible counterfeit
note. Universal JetScan has
stopped with this note as the top
note in the stacker. This note
has not been included in the
count.
Inspect the top note in the stacker. Next there are three options:
• If the note is deemed counterfeit, place it aside and press
Start
. It will not
be part of the count.
• If the note is deemed genuine, return it to the stacker and press the
appropriate
denomination value key (VAL key)
. Universal JetScan will
restart, and this note will be added to the count.
• Reprocess the note by returning it to the hopper and pressing
Start
.
This line could show
several different
suspect-document
codes. For details,
refer to the code
chart below.
© 2014 Cummins-Allison Corp.

CUMMINS ALLISON Universal JetScan 4166 Specifications

General

Brand	CUMMINS ALLISON
Model	Universal JetScan 4166
Category	Scanner
Language	English