EasyManua.ls Logo

Cupra ATECA 2022 - Page 116

Cupra ATECA 2022
357 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
114
Air conditioning
WARNING
People who cannot perceive pain or temper-
ature because of medications, paralysis or
chronic diseases (e.g. diabetes) or have a
limited perception of these, may suer burns
to the back, buttocks or legs when using seat
heating.
People with limited pain and temperature
thresholds must never use seat heating.
If an abnormality in the device's tempera-
ture control is detected, have it checked by a
specialist workshop.
WARNING
If the fabric of the cushion is wet, this can ad-
versely aect the operation of the seat heat-
ing, increasing the risk of burns.
Make sure the seat cushion is dry prior to
using the seat heater.
Do not sit on the seat with clothing that is
wet or damp.
Do not leave clothing that is wet or damp
on the seat.
Do not spill liquids on the seat.
NOTICE
To avoid damaging the heating elements of
the seat heaters, please do not kneel on the
seat or apply sharp pressure to a single point
on the seat cushion or backrest.
Liquids, sharps objects and insulating ma-
terials (e.g. covers or child seats) can damage
the seat heating.
In the event of smells, switch o the seat
heating immediately and have it inspected by
a specialised workshop.
If the original seat upholstery is replaced by
another material, the seat heating may over-
heat or its operation may be limited.
For the sake of the environment
The seat heating should remain on only when
needed. Otherwise, it is unnecessary energy
consumption.
Steering wheel heating
Steering wheel heating works only with the en-
gine running.
The selected steering wheel heating level will
be displayed on the instrument panel display.
Adjust the steering wheel heating by press-
ing on the multifunction steering wheel
Short press (less than 1 second):
The heating is switched on at its maximum
level. Press the steering wheel button repeat-
edly to set the desired level. To switch o steer-
ing wheel heating, press the steering wheel
button repeatedly until the heated steering
wheel icon is displayed on the instrument
cluster.
Long press (more than 1 second):
The heating is switched o directly from the
current operating level. Another long press on
the button switches on the heating directly at
the last level saved before switching o.
Automatic disconnection
The steering wheel heating will be switched o
automatically when any of the following condi-
tions are met:
Electrical energy consumption is too high.
The steering wheel heating system is faulty.
If the ignition is switched o.

Related product manuals