●
On the roof.
●
On the windscreen, between the layers of
glass.
●
On the rear and side windows with a printed
antenna structure ››› .
NOTICE
The printed antenna structure on the rear
and side windows can be damaged by objects
rubbing against it or by the use of corrosive
products, or products containing acids.
●
Do not apply any stickers to the rear and
side window areas.
●
Never clean the antenna structure with
corrosive or acidic products.
Materials and recycling in-
formation
Environmental compatibility
Environmental protection is a top priority in the
design, choice of materials and manufacture of
your new CUPRA.
Constructive measures to encourage recy-
cling
●
Joints and connections designed for easy
dismantling.
●
Modular construction to facilitate disman-
tling.
●
Increased use of single-grade materials.
●
Plastic parts and elastomers are marked in
accordance with ISO 1043, ISO 11469 and ISO
1629.
Choice of materials
●
Use of recycled materials.
●
Use of compatible plastics in the same part if
its components are not easily separated.
●
Use of recycled materials and/or materials
originating from renewable sources.
●
Reduction of volatile components, including
odour, in plastic materials.
●
Use of CFC-free coolants.
Ban on heavy metals, with the exceptions
dictated by law (Annex II of ELV Directive
2000/53/EC):cadmium, lead, mercury, hexa-
valent chromium.
Manufacturing methods
●
Reduction of the quantity of thinner in the
protective wax for cavities.
●
Use of plastic lm as protection during vehi-
cle transport.
●
Use of solvent-free stickers.
●
Use of CFC-free coolants in cooling systems.
●
Recycling and energy recovery from residues
(RDF).
●
Improvement in the quality of waste water.
●
Use of systems for the recovery of residual
heat (thermal recovery, enthalpy wheels, etc.).
●
The use of water-soluble paints.
Recycling of electrical or electronic
devices
All electrical or electronic devices (EED) that
are not permanently tted in the vehicle must
be marked with the following symbol:
This symbol indicates that EED must not be
discarded as home waste but through selective
waste collection.
Product recycling
To Next Page
Loading...
