EasyManua.ls Logo

Cupra ATECA 2022 - Page 151

Cupra ATECA 2022
357 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assistant systems
149
Cruise control system
Adapt your speed and safety distance to
the vehicle in front of you at all times to suit
the visibility, weather, road and traic condi-
tions.
After use, always switch o the speed lim-
iter to prevent the speed being regulated
against your wishes.
It is dangerous to use a set speed which
is too high for the prevailing road, traic or
weather conditions.
Operating the cruise control
Fig.107 On the multifunction steering
wheel: cruise control operation buttons.
Connecting
Press the button.
There is no speed saved and regulation is not
yet operating.
Start regulation
While driving, press the button .
The cruise control system saves and regulates
the current speed.
Adjusting the speed
While the GRA is set, the stored speed can be
adjusted:
+ 1 km/h (1mph)
- 1 km/h (1mph)
+ 10 km/h (5mph)
- 10 km/h (5mph)
The cruise control system only operates the
acceleration, it does not brake the vehicle.
Interrupting the adjustment
Briey press the button or press the brake
pedal.
The speed is stored.
Reinstating the cruise control
Press the button.
The cruise control system resumes the saved
speed and regulates it.
Switching o
Press and hold the button .
The cruise control system switches
o and the
saved speed is deleted.
Switching o the speed limiter
Press the button.
Select the speed limiter on the instrument
cluster display.
The cruise control system is switched o.
Troubleshooting
Cruise control fault
The control lamp switches on yellow.
Abnormal operation. Switch o the cruise con-
trol system and take the vehicle to a specialist
workshop.
The adjustment is interrupted unexpectedly
If the clutch pedal is pressed for a long time.
The vehicle has exceeded the saved speed
for a long time.
No forward gear has been selected.
A brake assistance system has intervened,
e.g. TCS or ESC.
Front Assist has braked the vehicle.
If the fault continues, disconnect the Emer-
gency Assist and consult a specialised work-
shop.

Related product manuals