wheel. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the assistants systems key located on
the main beam headlight lever.
When the lane departure warning is ready to
operate, the indications in the control lamps
will turn on briey as conrmation.
When the vehicle is restarted, the last adjust-
ment in the system will remain active.
Indication on the exterior mirror
The control lamp provides an indication on the
corresponding side regarding the traic situa-
tion behind the vehicle, if it is deemed to be
critical. The control lamp on the left-hand side
indicates the traic situation to the rear left of
the vehicle, and the control lamp on the right-
hand side indicates the traic situation to the
rear right of the vehicle .
In the case of retrotted tinted windows or
windows with tinted lm, the indications of the
external mirrors may not be seen clearly.
Keep the external mirrors clean and free of
snow and ice, and do not cover them with ad-
hesives or other similar materials.
It lights up
It turns on once briey: the lane departure
warning is activated and ready to operate, i.e.
when activating the system.
It lights up
It lights up continuously: the lane departure
warning has detected a vehicle in the blind
spot.
Flashes
A vehicle has been detected in the adjacent
lane and the turn signal has been engaged in
the direction of the detected vehicle.
For vehicles that are also equipped with Lane
Assist ›››page162, a warning to switch lanes
will also appear even though the turn signal
has not been engaged (Lane Assist “Plus”).
The control lamps light up when the ignition is
switched on and should turn o after approxi-
mately 2 seconds. This is the time taken for the
function check.
If there are no indications from the control
lamp of the lane departure warning, this means
that the lane departure warning has not detec-
ted any other vehicles at the rear area.
When the exterior lighting is low, the intensity
with which the control lamps come on is dim-
med. The user can modify the intensity of the
control lamps with up to 5 levels in the infotain-
ment system menu.
Lane assist Plus.
The Lane Assist Plus function can be used by
activating the Lane Assist ›››page162 and
Side Assist functions. In this case its functions
are expanded as described below.
If the driver initiates a lane change manoeuvre
in a potential critical situation:
●
The lamp ashes in the corresponding rear-
view mirror even though the turn signal has not
been activated.
●
The steering wheel vibrates to warn the
driver of the risk of collision.
●
torque is applied to correct the steering and
return the vehicle to its lane.
To Next Page
Loading...
